• Caballete hidráulico pesado, bien para levantar motos, incluso custom, touring,  trail y quads

• Perfecto para limpieza, mantenimiento y añadir accesorios

• Operación por pedal levantando hasta 600kgs de 15cms a 42cms con válvula de mano para bajar

• Barras de seguridad laterales

• Con ruedas para hacer maniobras mientras que el caballete esta cargado

• Asa de maniobras

Motorcycle Workshop Hydraulic Lift

• Unique heavy weight hydraulic lift, suitable to hoist unfaired motorcycles including choppers and cruisers, MX bikes and ATV’s

• Perfect for cleaning, servicing and adding

• accessories.

• Manually operated by foot, an hydraulic ram

• lifting up to 600kgs from height of 5 3/4” up to 16 1/2” with hand release valve lowering system.

• Added security of side-locking safety bars.

• Wheel-mounted for on-stand bike manoeuvring, complete with pull-handle

• Manoeuvring pull handle

• Fuerte caballete de pedal hecho de acero, perfecto para motos de campo de 60cc a 600cc

• Operado manualmente por palanca

• Protector de goma antideslizamientos

Moto-X Lift

• Heavy-duty steel foot lift, suitable for all off-road bikes from 60cc a 600cc

• Manually operated lifting arm

• Rubber matted top-plate

• Hasta 135kgs

• Rango de 340mm - 890mm

• Ideal por motos de cross

• Operado por pedal

• Protector de goma

• Homologado por CE

• Barra de seguridad

Motorcycle Scissor Lift
 

• Max lift 135kgs

• Range 340mm - 890mm

• Ideal for Motocross bikes

• Foot lever operated

• Locking footrest spring-hook

• Rubber top mat

• Fully CE approved

• Safety bar

85 €

• Construido en aluminio ultraligero

• Perfecto para montando motos en furgonetas o remolques

• utilizando 2 rampas valido para quads y ATV`s

• Extensible hasta: 2.17m

• Hasta 340 kgs

Motorcycle Loading Ramp

• Constructed from ultra lightweight aluminium and utilising a unique folding deign,

• This loading ramp is perfect for loading motorcycles on/off trailers and transport vehicles. 

• Also suitable for loading ATV's and quads, when using two ramps. 

• Extended plate length = 2.17m

• Max load 340Kgs/750 lbs

Disponible un kit de adaptacion para quads/Connector kit sold separately

• Facilita el alzado de ruedas traseras para la mayoría de  trabajos de mantenimiento

•  

• Ruedas resistente a aceite HD

• Base protegida con goma

Rear Paddock Stand for Twin Swing Arms
 

• Biketek Rear Paddock Stands allow easy and safe lifting of back wheels for most repair and maintenance jobs.

• Spring loaded quick release cup adaptor

• HD oil resistant wheels

• Protective rubber base bungs

• Caballete plegable para facilitar  la subida de la moto  por el tubo de la horquilla

• Ofrece el máximo acceso a la parte delantera de la moto para reparaciones, limpieza y mantenimiento

• Cada caballete viene con un kit de cinco  bujes de 13mm, 15mm, 16.5mm, 17mm y 18mm.

• Puede utilizarse junto  a un caballete trasero.

Front Head Stand
 

• The front head stand folds out to enable a motorcycle to be lifted by the front steering head tube.  This offers maximum access to the front end for all repair, cleaning and maintenance work

• Each stand is supplied with a kit of 5 of the most popular sized head lift pins, wincluding 13mm, 15mm, 16,5mm, 17mm and 18mm.  Other larger size pins are available to purchase separately.

• Front head must be used in conjunction with a rear paddock stand.